Main Nuts - Vehicle lifts

We supply a full range of spares and replacement parts to suit Bradbury, Laycock, Kismet, Tecalemit, Hofmann and Werther vehicle lifts. Ranging from lift cables, operating nuts, lift pads autochocks, basically almost any part you are after. If you dont see the part you need just give us a call on:

024 76491973;  fax on 024 76749655 or email info@garageequipmentdirect.co.uk

 All nuts are priced each unless specified.

If you don't see the item you require, please contact us as this is only a tiny selection of operating nuts

!

Bradbury 2103 operating nuts

Main screw operating nuts manufactured in brass, safety nuts supplied below. TWO NUTS PER LIFT REQUIRED

Bradbury 2103 Safety nut

Safety Nut for Bradbury 2103 two post vehicle lift. Older lifts had narrow safety nut which is half the length of the op nut, this nut which is same length should be fitted per manufacturers bulletin.

Bradbury 888 op nuts & Safety nuts

Please call if you only wish to replace op nuts
Supplied with op nuts and safety nuts. Price is per side. Recommended that both operating and safety nuts are changed to set up correct tolerance.

Bradbury 2701 / 2703 op nut

Operating nuts to suit Bradbury models 2701 and 2703.

Bradbury 2903 operating nuts

Main operating nuts in brass to suit Bradbury 2903 lift, note that these are handed (Power post and Slave post). From £94.99

Consul Mk 2 Operating nut

Operating nut to suit Consul 2 post lift Mk 2, identified with circlip around top of operating nut. TWO NUTS PER LIFT REQUIRED
hofduo

Hofmann Duo Lift ST28 Op nuts

Operating nuts to suit Hofmann Duo lift - ST28 - TWO NUTS PER LIFT REQUIRED
wertop

Hofmann Europa Op nut

Operating nut to suit Hofmann Europa 2 post lift, pleaser check if length is 120mm or 80mm. Models 301, 255, 2/3 TWO NUTS PER LIFT REQUIRED

Istobal Main Nut

Mod No 42712

Laycock / Tecalemit Operating nut for 8 ton and 14 ton lifts

Op nut to suit Laycock - Tecalemit 8 ton or 14 ton commercial four and six post vehicle lifts

Laycock Coronation lift Operating Nuts

Op nuts to suit Laycock Coronation, Coro 1 and Coro 2 Vehicle lifts. Coro 2 op nut is flat bottomed with no boss protruding through the trip plate, also identified that under the electric motor there is a drive belt running from motor to large 12 inch dia cog rather than the chain running directly around sprocket on the motor. Please select.

Picture shows op nut to suit Coronation and Coro 1

Laycock 148155 op nut

Operating nut to suit Laycock 2 post vehicle lift Model No 148155

OMCN 2 post lift nut

Operating nut to suit OMCN TWO post lifts. TWO NUTS PER LIFT REQUIRED

OMCN 1 post lift

Operating nut to suit OMCN SINGLE post lift

Ravaglioli KP307 op nut

Operating nut to suit Rav KP 307

Tecalemit Twintec Mk 5 - SF8768 Op Nut

Operating nuts to suit Tecalemit two post lift Model No SF8768 manufactured in brass. TWO NUTS PER LIFT REQUIRED. IMPORTANT that you provide serial number in the space provided as there are two types of nut. 

Tecalemit Twintec Mk 5 Safety nuts (Steel)

SF8768 lift safety nuts

Tecalemit SF8907 Op nut

Operating nut to suit Tecalemit SF8907 two post lift, please measure main screw which will be either 40mm diameter OR 45mm diameter. Price is each, TWO NUTS PER LIFT REQUIRED

Stenhoj operating nut

Operating nut to suit Stenhoj mascot lifts Models 624, 614. Nylon 5mm pitch origional looks like a gear on the larger diameter. TWO NUTS PER LIFT REQUIRED
souopnut

Souriou Op Nuts

Op nuts to suit Souroiu 2 post lifts Nylon Type. TWO NUTS PER LIFT REQUIRED
wertop

Werther 301 operating nut

Operating nut to suit Werther 301 2 post lift, pleaser check if length is 120mm or 80mm TWO NUTS PER LIFT REQUIRED