Tecalemit Lift spares

Spares for Tecalemit vehicle lifts, also listed here are some brake tester spares

Tel: 024 76491973  - Fax: 024 76749655  

Email: info@garageequipmentdirect.co.uk

Tecalemit spares available from stock.

!
sf8768armlock

Tecalemit Arm lock Rod

Arm lock rod (Long arm) to suit Tecalemit SF8768. Fits on side of arm and locks arm in position
sf8768shortlock

Tecalemit Arm lock Rod

Arm lock rod (Short arm) to suit Tecalemit SF8768. Fits on side of arm and locks arm in position.

Arm lock for Kismet & Laycock 2 post lifts

Arm lock and toe guard kit for Laycock 1700 and Kismet 1700 lifts. 1 required per arm. Also fits Tecalemit 200020 lift

Meets all new legislation

chainguide

Tecalemit Chain guide

Chain guide to suit Tecalemit Twintec Mk 5 (SF8768)

Drive chain

Drive chain to suit Tecalemit Mk 3 Mk 4 or Mk 5 vehicle lifts. Also suits Hoffman Europa, Werther 301 and 255, Bradbury 2103 vehicle lifts. Comes in a 25' box 1/2" pitch
chaingui

Tecalemit SF8837 chain guide

Chain guide for Tecalemit SF8837 two post vehicle lift

Laycock / Tecalemit High Speed lift contactor

Contactor for control box of Tecalemit/Laycock high speed vehicle lift. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982, 3 phase

Laycock/Tecalemit HS overload

Overload for control box of Tecalemit/Laycock high speed vehicle lift. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982, 3 phase (Fits to item above)

Laycock / Tecalemit High speed control switch

Power post micro switch located on top of lift control valve. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
hssealkit

Laycock / Tecalemit High speed lift seal kit

High Speed Lift - for model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,

Laycock / Tecalemit Main Ram feed hose

Ram feed hose for Laycock/Tecalemit High Speed lift comes from Control box on power post down to front of platform. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Tecalemit SF8757 Main ram feed hose

Main ram feed hose for Tecalemit SF8757 or SF8758 Runs from control box into front of platform along ram and connects to ram in centre of platform.

Tecalemit Twintec Mk 5 - SF8768 Op Nut

Operating nuts to suit Tecalemit two post lift Model No SF8768 manufactured in brass. TWO NUTS PER LIFT REQUIRED. IMPORTANT that you provide serial number in the space provided as there are two types of nut. 
rollerposths

Laycock / Tecalemit Post guide roller

Post guide roller for Laycock/Tecalemit High Speed lift (Fits onto stabalizer bracket) shown on bracket - not included. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Pulley to suit Laycock - Tecalemit High speed lift

Post pulley or single track horizontal cast pulleys to suit Laycock high speed or Tecalemit 151111 four post vehicle lift.

Pin is listed below 3" for horizontal post pulleys and 5" for vertical platform pulleys

Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Pulley to suit Laycock - Tecalemit High speed lift

Horizontal double track cast pulleys to suit Laycock high speed or Tecalemit 151111 four post vehicle lift.

Pin is listed below, 5" is required

Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

hspinshort

Pulley pin to suit above pulleys

These are only fitted on the corner post vertical pulleys and are approx 3" length.
hspin

Pulley pin to suit above pulley

These are fitted to the platform pulleys which sit horizontal and are approx 5" length

hsspacer

Laycock / Tecalemit Pulley Spacer

Spacer for pulleys on all High speed vehicle lifts, these are fitted on main posts and also on horizontal platform pulleys.
rollerhs

Laycock / Tecalemit Ram guide roller

Ram end plate guide roller (21mm wide by 21mm length). Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Laycock / Tecalemit Safety arm cable roller

Safety arm roller for Laycock or Tecalemit high speed vehicle lift, fitted where cable runs up inside post after passing around the pulley and anchoring at top of post. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982 (Price is each)

Laycock / Tecalemit control valve (top)

High Speed lift top section of control valve, no need to purchase complete valve if cam assembly breaks. Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,

Laycock / Tecalemit control valve

Control valve to suit Model Nos 151112, 151111, 122478, 123784, 123795, 121464, 123794, 150981, 150982,

hscontkit

Control valve service kit

Tecalemit / Laycock high speed lift control valve service kit
springhssaf

Laycock / Tecalemit Safety arm spring for High Speed lift

Safety Arm spring for Laycock/Tecalemit High speed lift  (2 1/4" length).  Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Laycock / Tecalemit Operating nut for 8 ton and 14 ton lifts

Op nut to suit Laycock - Tecalemit 8 ton or 14 ton commercial four and six post vehicle lifts

Laycock / Tecalemit Main screw for 8 ton and 14 ton lifts

Main screw for Laycock / Tecalemit 8 tonne or 14 tonne four or six post commercial vehicle lifts

Tecalemit Safety cable Mk5 SF8768

Safety cable to suit Tecalemit twintec Mk5 SF8768 supplied with FREE nylon guide tubes and clips for base of posts

Laycock / Tecalemit Safety switch

Safety micro switch for Laycock/Tecalemit 8 and 14 ton vehicle lifts.
hssafvalve

Laycock / Tecalemit Safety valve

For all Laycock / Tecalemit High Speed vehicle lifts, situated on main ram on underside of platforms. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982
hsrelief

Laycock / Tecalemit Relief Valve

Laycock / Tecalemit High Speed Vehicle Lift relief valve. Suits all, including model Nos 151112, 151111, 123784, 122478, 123795, 121464, 123794, 150981, 150982

Available as New or Service Exchange. Please note a supplement of £100.00 is charged on a Service Exchange unit. This will be refuded on return of your exchange valve.

Toe guard bracket

Has your insuranse inspector picked you up for no toe gaurds. For a cheap solution just bolt or weld our brackets about every 18" and use conduit for the rail. 

Tecalemit lowering valve cartridge

Lowering valve Cartridge to suit Tecalemit SF8757, SF8758, SF8761, SF8762. If you have oil leak from lowering valve, usually leaking from cartridge.

Tecalemit Push button

Push button for Tecalemit Twintec Mk 5 (SF8768) will also suit Mk3 & 4  two post lifts - To operate the Up or Down control of the lift. You will only see the green button part on front of the lift control box. If you wish to use this button for another lift, check on the back of the button and see if the terminals are NO or NC and if there is 1 or 2 blocks, just mention in the "Comments" box.

Tecalemit Mk 6 control switch

Control switch for Tecalemit Twintec Mk 6 two post lift - Up and Down control. Actually operates lift, you will only see switch part on front of the lift.

Tec Mk 5 SF8768 Contactor

Contactor for Tecalemit twintec mk 5,  SF8768 two post lift, comes with the auxilliary that is mounted on the front.

Tecalemit Safety arm actuator and roller

Actuator for Tecalemit four post vehicle lifts, comes with roller and suits Mk 4 and Mk 5 spacemaster lifts.
btswitch

Tecalmit Brake Tester Switches

Hand control switches for Tecalemit DE7184 Brake Tester - 1 red and 1 white supplied.

Tecalmit Brake Tester Cable

Hand control cable for Tecalemit DE7184 Brake Tester. (Price per metre)

Tecalemit oil dipper

Oil dipper for Tecalemit 2 post lifts including Mod SF8768, twintec Mk 5 and 6

Radius plates Heavy Duty

Select correct lift profile by viewing "More images"
Heavy duty radius plates suitable for Class 4 or 7 MOT

Heavy duty radius plates with ballrace

Select correct lift profile by viewing "More images"
Heavy duty radius plates suitable for Class 4 or 7 MOT with nylon ballrace, Now cadmium plated and gritted slip plate.
postcover

Post cover

Top post cover for all Tecalemit and Laycock High speed lifts

tecpark

Parking device for High Speed lift

Parking device for Tecalemit or Laycock High Speed lift - Use when the lift is in fully raised position and drop into the platform to stop lift creeping down.

Tecalemit SF8907 Drive belts

Set of 3 Drive vee belts to suit Tecalemit SF8907 vehicle lift
bearing3

Top bearing kit for Tecalemit Azur

Top bearing kit (per side) for 2.8 tonne Tecalemit Azur SF8907, Tecalemit SF9010

Safe Working Load Labels

Stickers for SWL load identification for current Health and Safety markings on vehicle lifts